Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump

Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump

Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump
To find more interesting products. Stock house and garden products made. Supply a wide range of other technical products including their accessories and parts. We mount products at very competitive prices.

Our professional consultants will gladly advise you should you have any question. All products at unbeatable prices and performance. A wide range of products with a wide range of accessories. Workshop and spare parts service. Competent technical product advice available.

We look forward to hearing from you. SELECTION 4: 3 BOREHOLE-STAR 750-4. Characterisctic Curve - 3 BOREHOLE-STAR 750-4. SELECTION 9: AQUA-10 -Automatic-Controller (wired) and Cartridge Filters. Connection Diagram AC10 with Borehole Pump.

SELECTION 10: Flow Controller PRESFLO® - Automatic-Controller (wired) with intelligent self monitoring functions and cartridge filter. Connection Diagram Flow Monitor PRESFLO® with Borehole Pump. SELECTION 11: STEADYPRES® 8.5Amp M/M - Inverter-Automatic-Pump-Controller (wired) with intelligent self-monitoring functions and cartridge filter. Borehole pump SCREW-STAR and flow switch- free choice. For ALL boreholes and wells up to a depth of ca.

70m with little to moderate sand presence. For application in environmental protection. Immersion depth: up to 5m.

Inexpensive, high quality-submersible pressure-screw pump. For extremely deep well/borehole drilling (up to 80m). Quality stainless steel housing with brass parts. Robust, stable sand resistant borehole screw pump from.

Extremely deep borehole drilling (up to 60m). This is one of the few borehole pumps which is able to cope with large quantities of sand! The higher the sand content is, the higher the wear and tear of the clutch. That is why we recommend a set of spare parts to be ordered with the pump. These can be easily changed by opening the pump housing and replacing the hard rubber coupling. How do you determine how high the content of sand is in water? Measure the amount of water and then the weight of the deposited sand.

You then make the ratio of the two contents. PUMP SCREW - STAR 370-4 Power 370W, max. 1,500l/h, diameter: 98.5mm.

PUMP SCREW - STAR 550-4 Power 550W, max. 2,400l/h, diameter: 98.5mm. PUMP SCREW - STAR 750-4 Power 750W, max.

2,700l/h, diameter: 98.5mm. 3 Pump BOREHOLE-STAR 750-4, IMPELLER PUMP Power 750W, max.

Pressure 5.3bar, diameter: 78mm. This pump has a longer lifespan through maintenance and its leak free mechanical sealing than conventional ones. With the same electrical power, this pump delivers more water than other pumps with similar consumption of electric energy due to its special construction. Therefore, we genuinely call this pump as ENERGY SAVING PUMP! Each flow controller is provided with a cartridge filter!

As a result, problems due to water pollution can be significantly reduced. We recommend the use of AC10. In this combination, there are some 1000 piece pumps since tens of years of service. Flow controller AC10 has a built-in dry running protection.

If there is no water available after switching on the pump (empty cistern), the flow controller will automatically switch off the pump (dry run protection). A check valve is also integrated into the flow controller. This prevents the emptying of pipe systems on the consumer side. The pressure gauge monitors the switch on pressure and the pressure in the system. The switching device is not suitable for pumps having a pressure significantly below 1.5bar.

Intelligent PUMP CONTROL PRESFLO®- for automatic switching on of the pump (if necessary), integrated mini-pressure tank, run dry protection and leak monitoring, with built-in check valve and pressure gauge (no pressure reducer). Through special protective coating of electronics, the Flow Controller PRESFLO® can be used in manhole cisterns / wells. Installation instructions should be observed. STEADYPRES® 8.5Amp M/M - Inverter-Automatic-Pump-Controller, wired. To reduce energy consumption up to 85% when changing pump performance (when supplying WC, washing machines, lawn sprinklers), we recommend the use of STEADYPRES® 8.5Amp M/M - Inverter-Automatic-Pump-Controller with intelligent self monitoring functions.

The STEADYPRES® with integrated dry run protection and an adjustable auto-start ensures almost constant pressure in the water circulation, avoiding dangerous pressure shocks, overclocking and overheating of the pump. In addition, the lifespan of the pump is substantially increased and noise generation is significantly reduced. Borehole Pump SCREW-Star or 3 BOREHOLE-STAR Pump 750-4 (IMPELLER PUMP). Flow Monitor AC 10 / PRESFLO® / STEADYPRES®, wired.

Outlet connection: 2.54cm (1 inch) internal dimension. Number of revolutions: 2,850UpM. Outlet connection: 2.54cm (1 inch) internal. 3 Borehole Pump BOREHOLE-STAR 750-4, Impeller Pump. Cable length: 15m (flat cable).

Sand compatibility: up to 0.1%. Content of solid substance: 0.10%. PH value: 6.8 - 8.5. Cast iron oil chamber with stainless steel cover.

Oil-bearing shaft with permanent lubrication. Used material: stainless steel, brass, cast iron, reinforced glass-fiber polymer.

Connection via 2.54cm (1 inch) external dimension. Operating voltage: 110V - 230V AC at 50/60Hz. Switch on pressure: 1 - 3.5bar (adjustable). Preset switch on pressure: 1.5bar (optimal for most applications). High quality rubber cable H07RN-F.

Voltage: 230V AC at 50Hz. Cable length: ca 0.5m with socket, and ca. Suction connection: 1 external dimension (BSP). Operating pressure: 10bar (150 PSI). Bursting pressure: 40bar (580 PSI).

Power supply: single phase -230V (AC ± 10%) -50/60Hz. Input voltage: 230V AC at 50Hz. Output voltage for pump: 230V AC at 25-50Hz. Working pressure: 10bar (150 PSI). Dry run protection function with automatic reset. Suction connection: 1 external pressure (BSP).

We regularly check the product quality of our suppliers and guarantee the best quality and durability for long enjoyment of our products. For used goods, this is reduced to 12 months.

If we provide a further guarantee, this is listed in the item description. For used goods this can be ruled out. We will gladly resolve the problem.

This approach helps us in serving you better while satisfying your needs. Help us serve you better. Let us deal with each other fairly! Our shop is well stocked with spare parts should you need to replace anything. If in doubt, unpack the goods immediately and check this.

You will receive an invoice with VAT. TERMS & CONDITIONS / WITHDRAWAL. Our Conditions, Cancellation and return rights, can be found on our -site. Or below on the supply side.

The instructions can be found in our Shop. The item "BOREHOLE PUMP DEEP WELL PUMP FLOW CONTROLLER WATER PUMP SUBMERSIBLE GARDEN PUMP" is in sale since Wednesday, June 08, 2016.

This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "amur_shop" and is located in Schwallungen. This item can be shipped to European Union member countries.de

  • MPN: Does Not Apply


    • Borehole Pump Deep Well Pump Flow Controller Water Pump Submersible Garden Pump