Max Head: 40M(131.2FT). Max Flow: 3m3/H(792.5GPH). Diameter of pump: 76mm(3Inch).
Outlet Diameter: 32mm(1-1/4 Inch). Length of cable: 1m(3.28FT). Range of working voltage: DC 18V-45V.A complete range of accessories including 1m pure copper wire and the water pump with 32mm outlet. You need totally about 680w (36v) solar panels. If the sun is not very well, you can use more solar panels. Over-voltage protection / Under-voltage protection: The pump will stop working automatically when the voltage is too high or too low; Then it will detect the voltage every 10 minutes, and it will start to work automatically when the voltage is between 18v-45v. The pump can be directly connected to solar panels without battery in sunshine. The 12v solar water pump system are recommended to be powered by 18v Monocrystalline / Polycrystalline solar panels in parallel connection; The 24v solar water pump system are recommended to be powered by 36v Monocrystalline / Polycrystalline solar panels in parallel connection. It is recommended to completely immerse the pump in the water tank, connect the UVW line, ensure the correctness of the wires, and then put it into the borehole for using.
WC, WH check if there is water in the well. Under normal conditions, there will be water in the well, so the latter two are closed.
If you need to detect water in the well, you can configure it as shown. Do not operate for long time when there is no water in the pump. The pump is submersible pump, it must be full submerged in the water.PS: 6 mm² or 10 mm² copper wire is required when the cable length is too long. The item "DC24V Brushless Solar Screw Deep Well Submersible Water Pump 340W, 131.2FT Max" is in sale since Thursday, August 22, 2019.
This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "bokypond" and is located in sz. This item can be shipped worldwide.