Tsurumi LSC1.4S Submersible Water Pump- LSC210

Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump- LSC210

Tsurumi LSC1.4S Submersible Water Pump- LSC210
Tsurumi LSC1.4S Submersible Water Pump. Succeeded the famous LSC4, which was the original puddle sucker. It is able to pump water down to 1mm, which makes it suitable for pumping large or small. Eas of nuisance water found on fl at surfaces.

This new, updated, model incorporates. A dual position 25mm(1) outlet port, to enable the user to position the outlet hose.

Horizontally or vertically and avoid it kinking; 50mm(2) is also available, as an optional. And a cast aluminium pump stand to offer increased protection of the steel and rubber. A combination of a rubber pump chamber and a urethane vortex impeller.

Enables the design to offer excellent wear resistance in site water applications that contain. Sand and silt in suspension, thus maintaining performance and reliability. Feature is an integral swing check valve to prevent back fl ow of water from the discharge.

Quality is further enhanced with a 403 stainless steel shaft that is fi tted with an ultra. Hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and an oil lifter.

To maintain seal lubrication during operation in any position. The water and air cooling route to the top outlet, allows the pump to operate for extended.

Periods with little or no water. Used widely by hire outlets, utilities and fl ood control. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable. For precise water level control we recommend the use of the. 3 probes, in 304 stainless steel, are set in a epoxy-resin fi lled holder.

Esent on, off and common. The common must always be the lowest point. Of the probes, while the on and off can be cut to any size from 5mm to 50mm, from the. Base of the pump, but must have a minimum difference of between 3 and 5mm.

Run Type: Manual Outlet Diameter 25mm (1) Flow: 170 L/min Total Head: 11m Free Passage: 6mm Voltage: 230 Kw: 0.48kw Dry Weight: 12.0 Kgs Diameter: 196mm Height: 316mm. The item "Tsurumi LSC1.4S Submersible Water Pump- LSC210" is in sale since Wednesday, January 29, 2020. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Sump, Trash & Utility Pumps\Trash & Water Transfer Pumps".tid7" and is located in Derby. This item can be shipped to United Kingdom.


Tsurumi LSC1.4S Submersible Water Pump- LSC210