Water Pump Submersible For Water Feature Fountain Pond Pool Mains Powered

Water Pump Submersible For Water Feature Fountain Pond Pool Mains Powered

Water Pump Submersible For Water Feature Fountain Pond Pool Mains Powered
Water Feature Pumps Mains Powered. Our best range of pumps for powering water features and cascade waterfalls.

They come in a wide range of sizes and the design of the pump does vary (see table below) depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountain heads or other accessories. Our pumps are reliable, efficient and guaranteed for two years.

We recommend them for use in water features and cascades / waterfalls. They do not come with fountain heads and are not for creating fountains if you want to create a fountain we recommend our Elimax or Libel range which are supplied with one or more fountain heads. Our pumps are available in a range of sizes, from 350 litres / hour to 20,000 litres per hour. Each pump is supplied with 10 metres of cable except the 600lph and 750lph which has a 5m cable.

Outlet Hose-tail Size (dia mm). H 6cm (2.4") D 4.5cm (1.8") Nozzle 1.3cm (0.5). H 5cm (2") D 5.5cm (2.2") Nozzle 1.5cm (0.6).

H6cm (2.4") D6.5cm (2.6") Nozzle 1.5cm (0.6). H 6.5cm (2.6") D 7cm (2.8") Nozzle 2.5cm (1).

H 8.5cm (3.3") D 8.5cm (3.3") Nozzle 2.5cm (1). H 9cm (3.5") D 9.5cm (3.7") Nozzle 3.5cm (1.4). H 10.5cm (4.1") D 10.5cm (4.1") Nozzle 4cm (1.6).

H 13cm (5.1") D 12.5cm (4.9") Nozzle 4.5cm (1.8). H 12cm (4.7") D 19cm (7.5") Nozzle 5cm (2). H 13.5cm (5.3") D 20cm (7.9") Nozzle 4cm (1.6). H 15cm (5.9") D 26.5cm (10.4") Nozzle 4.5cm (1.8). H 14.5cm (5.7") D 25cm (9.8") Nozzle 8cm (3.1). H 15cm (5.9") D 26cm (10.2") Nozzle 6.5cm (2.6). For example 600lph pump would be able to get water up a tube to a height of 110cm but no higher. If you wanted it to go up 110cm and then flow out of the tube you would need the next tube size up. This is based on the tube being a 1 tube. If you want to pump water to create a cascade / waterfall of a given width and height 120cm, the pump you need depends on the width as follows. Pump for cascade height of 120cm. For example to create a waterfall of width 90cm and height 120cm, use the 10,000 litres / hour pump (The 10000). If your specification is between pumps it is always advisable to go for the slightly higher powered pump than you need you can always reduce the flow but you cannot increase it beyond the capacity of the pump. 350 = Height 6cm (2.4 inches) Depth 4.5cm (1.8 inches) Nozzle 1.3cm (0.5 inches) 450 = Height 5cm (2 inches) Depth 5.5cm (2.2 inches) Nozzle 1.5cm (0.6 inches) 600 = Height 6cm 2.4 inches Depth 6.5cm (2.6 inches) Nozzle 1.5cm (0.6 inches) 750 = Height 6.5cm (2.6 inches) Depth 7cm (2.8 inches) Nozzle 2.5cm (1 inch) 1000 = Height 8.5cm (3.3 inches) Depth 8.5cm (3.3 inches) Nozzle 2.5cm (1 inch) 1500 = Height 9cm (3.5 inches) Depth 9.5cm (3.7 inches) Nozzle 3.5cm (1.4 inches) 2000 = Height 10.5cm (4.1 inches) Depth 10.5cm (4.1 inches) Nozzle 4cm (1.6 inches) 3000 = Height 13cm (5.1 inches) Depth 12.5cm (4.9 inches) Nozzle 4.5cm (1.8 inches) 4000 = Height 12cm (4.7 inches) Depth 19cm (7.5 inches) Nozzle 5cm (2 inches) 6000 = Height 13.5cm (5.3 inches) Depth 20cm (7.9 inches) Nozzle 4cm (1.6 inches) 10000 = Height 15cm (5.9 inches) Depth 26.5cm (10.4 inches) Nozzle 4.5cm (1.8 inches) 12000 = Height 15cm (5.9 inches) Depth 26.5cm (10.4 inches) Nozzle 4.5cm (1.8 inches) 15000 = Height 14.5cm (5.7 inches) Depth 25cm (9.8 inches) Nozzle 8cm (3.1 inches) 20000 = Height 15cm (5.9 inches) Depth 26cm (10.2 inches) Nozzle 6.5cm (2.6 inches). The item "Water Pump Submersible For Water Feature Fountain Pond Pool Mains Powered" is in sale since Thursday, August 16, 2012. This item is in the category "Garden & Patio\Ponds & Water Features\Pond & Fountain Pumps". The seller is "primrose_london_uk" and is located in Wokingham. This item can be shipped to United Kingdom.


Water Pump Submersible For Water Feature Fountain Pond Pool Mains Powered